How to Clean a Stone Ring with Reef Texture

Quick answer

Clean your stone ring with reef texture using a soft, damp cloth and mild soap, avoiding harsh chemicals and ultrasonic cleaners that can damage the larimar and the textured finish.

Step-by-step cleaning process

1. Prepare your cleaning solution: Mix a few drops of mild dish soap with lukewarm water in a small bowl. Avoid using hot water, which can cause thermal shock to the larimar. Do not use vinegar, bleach, or ammonia-based cleaners.
2. Soak the ring briefly: Place the ring in the soapy water for no more than 2–3 minutes. Prolonged soaking can loosen the stone setting or damage the metal finish. Set a timer to avoid forgetting the ring in the water.
3. Gently clean the ring: Use a soft-bristled toothbrush or a lint-free cloth to clean the ring. Focus on the reef texture crevices with light circular motions. Do not scrub the larimar itself—wipe it with a damp cloth instead. Never use a hard brush or abrasive sponge; they will scratch the silver and the stone.
4. Rinse and dry thoroughly: Rinse the ring under a gentle stream of lukewarm water to remove any soap residue. Pat dry with a soft, clean cloth, ensuring no moisture remains in the textured areas. Air drying can leave water spots; always hand-dry with a microfiber cloth.
5. Polish the silver (optional): If the sterling silver has tarnished, use a silver polishing cloth designed for gemstone jewelry. Avoid liquid silver polish, which can seep into the setting and damage the larimar. Polish only the metal parts and avoid the stone entirely.

Product details

• Stone Ring with Reef Texture Ribbon - Larimar: Handcrafted from sterling silver with a rectangular larimar cabochon, band width 3mm, stone size 20mm x 10mm. The narrow band and soft stone mean you need to clean carefully around the setting without using abrasive tools or chemicals.